Product Detail

  • Home
  • Product Detail

Horizontal Laminar Air Flow

Model : ACL-44-A

AICILHorizontal Laminar Air Flow

Product Description:

laminar flow principle involves double filtration of air through coarse pre-filter (up to 5 microns ) and hepa filter(down to 0.3 micron ) for filtration of biological and particulate contaminants. A constant uni-dirctional air flow is drawn from atmosphere  and passed through pre and hepa filters on the work surface. fabricated out of reinforced ply board which is clad in from out side in laminated sheet and inner exposed areas are finished in expoxy paint . table top covered with non glaring laminated sheet or stainless steelsheet. side panels are fixed and are made out of transparent accrylic sheet. the frontdoor is folding type and made of thick acrylic sheet. (optional) stand is built in type or detachable.

Bloer unit has AUE or equivalent motor and is dynamically balanced with minimal sound & vibration level. fluorescent lighting os also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed. two way gas for gas line has also been provided.

The Horizontal Laminar Airflow Bench provided by us facilitates easier installation and has lower needs for maintenance. This bench is acclaimed for its sturdiness.
Features:- Larger bench size - Highly sturdy designThe Laminar Flow Cabinet can be made of S. S. Instead of mild steel at an extra cost . Price on request.

Product  Specification:

Model No. Working Area HEPA Filter No. of HEPA Filter
AHL-2W/M/S 2"x2"2 2"x2"x6 1
AHL-3W/M/S 3"x2"2 3"x2"x6 1
AHL-4W/M/S 4"x2"x2 4"x2"6 1
AHL-6W/M/S 4"x2"x2 3"x2"6 2


Direction of flow





90 FPM +/- 20%

Hepa Filter

Size and quantity will depend on the size selected

Particle retention

Above 0.3 micron

Blower Assembly

1/3 HP,1440 RPM

Noise level

65 decibel +/- 5%

Rate of air flow

0.40 to 0.75 M/Sec (90 FPM)

Vibration level

< 2.5 micron